Free Shipping on orders over 50$

Hours:
Mon - Thurs: 10am to 4pm
Fri: 10am - 3pm

Search results for 'daessy mini bent tube'

Items 1 to 10 of 98 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

List  Grid 

Set Ascending Direction
  1. Mini Bent Tube Mount

    DAESSY Mini Bent-Tube Mount

    Special Orders. We'll call you to discuss. Usually ships in 3 weeks

    The Mini Bent-Tube Mount is a basic mount assembly. A single right-angle bent tube provides a simple support for a communication device, iPad or tablet. The Mini Bent-Tube Mount is easily removed from the chair and is non-directional so that it may be installed on either side of a wheelchair.

    Learn More
  2. DAESSY Rigid Mount with Bent-tube - the "in-use" position

    DAESSY Rigid Mount with Bent-tube - standard

    Special Orders. We'll call you to discuss. Usually ships in 3 weeks

    The most basic of the DAESSY Wheelchair Mounting Assemblies is the DAESSY Rigid Mount with Bent-tube. This mount consists of one run of stainless steel tube bent at ninety degrees connected to the wheelchair by a Frame Clamp Assembly. A DAESSY Quick Release Base connects your technology to the bent-tube. The pole can be held securely in three positions - "in use", "egress" and "stowed" via simple colar and pin arrangment, with the pin found on the Frame Clamp Outer Piece. The colar (Index Colar or IC1) also sets the vertical tube height. This mount is not recommended for tilting seat systems with tilt more than 15 degrees or for installations angled beyond 15 degrees from vertical.

    Learn More
  3. DAESSY Rigid Mount with Bent-Tube - locking. Locked in place.

    DAESSY Rigid Mount with Bent-Tube - locking

    Special Orders. We'll call you to discuss. Usually ships in 3 weeks

    The simplest of the DAESSY Wheelchair Mounting Assemblies is the DAESSY Rigid Mount with Bent-Tube - Locking. This mount consists of one length of stainless steel tube bent at 90 degrees.  The Horizontal and Vertical sections of the DAESSY Rigid Mount with Bent-Tube Mount are of the same single run of stainless steel tubing, which makes it simple to fit and adjust. A Locking Frame Clamp Assemlby connects the Bent-tube to the wheelchair and a DAESSY Quick Release Base connects your technology to the kit. Also include is a simple and easy locking mechanism, the Removable Outer Piece, which allows secure locking of the poles to the wheelchair when "in use" and easy removal from the wheelchair when not required. This version is best used on Tilting Seat wheelchairs. The DAESSY Rigid Mount with Bent-Tube Mount requires straight lines from the Frame Clamp Assembly to the back of the supported technology so if trays, armrests or other aspects of the wheelchair get in the way, consider a DAESSY Rigid Mount as an option for fitting purposes.

    Learn More
  4. DAESSY Frame Clamp Inner Piece for 1" Square tubing

    DAESSY Frame Clamp Inner Piece for 1" Square Tube

    Out of Stock, ships in 2 to 3 weeks after ordering

    $235.00

    For use with 1" or 25mm square tubing. Learn More
  5. DAESSY Unicorn Twist for iPad Mini 5

    DAESSY Unicorn Twist Case for iPad Mini 5

    1 in stock

    $325.00

    DAESSY Unicorn Twist Case for iPad mini 5, based on a Supcase Unicorn Beetle Pro protective case. This Case will fit your iPad Mini 5 and connect it to your DAESSY Mount Kit, whilst allowing "on-mount" rotation from portrait to landscape.

    This case DOES NOT fit iPad Mini 6th generation

    Learn More
  6. DAESSY Unicorn Standard Case for iPad Mini 5

    DAESSY Unicorn Standard Case for iPad Mini 5

    Out of Stock, ships in 2 to 3 weeks after ordering

    $288.00

    DAESSY Unicorn Standard Case for iPad Mini 5, based on Supcase Unicorn Beetle Pro protective case. This Case will fit and protect the iPad and connect it to your DAESSY Mount Kit, allowing portrait or landscape orientation. Learn More
  7. Frame Clamp Side Mount Inner Piece for 1" Round Tube

    DAESSY Frame Clamp Inner Piece for 1" Round Tube - Side Mount

    Out of Stock, ships in 2 to 3 weeks after ordering

    $235.00

    A DAESSY Clamp for attachment to wheelchairs with 1" round frame tube and sits to the side or underneath of the tube. Learn More
  8. Round Frame Clamp - for 1.250" tubing

    DAESSY Frame Clamp Inner Piece for 1.250" Round Tube

    Out of Stock, ships in 2 to 3 weeks after ordering

    $260.00

    A DAESSY Clamp for 1.250" round tube. Learn More
  9. Round Frame Clamp - for 1.5" tubing

    DAESSY Frame Clamp Inner Piece for 1.500" Round Tube

    Out of Stock, ships in 2 to 3 weeks after ordering

    $260.00

    A DAESSY Clamp for 1.500" round tube. Learn More
  10. Round Frame Clamp - for 1.125" tubing

    DAESSY Frame Clamp Inner Piece for 1.125" Round Tube

    Out of Stock, ships in 2 to 3 weeks after ordering

    $260.00

    A DAESSY Clamp for 1.125" round tube. Compatible with Zippie Zone with additional alternative lengths bolts (supplied if required) Learn More

Items 1 to 10 of 98 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

List  Grid 

Set Ascending Direction