Free Shipping on orders over 50$

Our Easter break:
Closed midday March 28th
Re-open 10am April 2nd
All the best!

Search results for 'DAESSY'

Items 21 to 30 of 95 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

List  Grid 

Set Ascending Direction
  1. DAESSY Rigid Mount with Bent-Tube - locking. Locked in place.

    DAESSY Rigid Mount with Bent-Tube - locking

    Special Orders. We'll call you to discuss. Usually ships in 3 weeks

    The simplest of the DAESSY Wheelchair Mounting Assemblies is the DAESSY Rigid Mount with Bent-Tube - Locking. This mount consists of one length of stainless steel tube bent at 90 degrees.  The Horizontal and Vertical sections of the DAESSY Rigid Mount with Bent-Tube Mount are of the same single run of stainless steel tubing, which makes it simple to fit and adjust. A Locking Frame Clamp Assemlby connects the Bent-tube to the wheelchair and a DAESSY Quick Release Base connects your technology to the kit. Also include is a simple and easy locking mechanism, the Removable Outer Piece, which allows secure locking of the poles to the wheelchair when "in use" and easy removal from the wheelchair when not required. This version is best used on Tilting Seat wheelchairs. The DAESSY Rigid Mount with Bent-Tube Mount requires straight lines from the Frame Clamp Assembly to the back of the supported technology so if trays, armrests or other aspects of the wheelchair get in the way, consider a DAESSY Rigid Mount as an option for fitting purposes.

    Learn More
  2. DAESSY Rigid Mount with Bent-tube - the "in-use" position

    DAESSY Rigid Mount with Bent-tube - standard

    Special Orders. We'll call you to discuss. Usually ships in 3 weeks

    The most basic of the DAESSY Wheelchair Mounting Assemblies is the DAESSY Rigid Mount with Bent-tube. This mount consists of one run of stainless steel tube bent at ninety degrees connected to the wheelchair by a Frame Clamp Assembly. A DAESSY Quick Release Base connects your technology to the bent-tube. The pole can be held securely in three positions - "in use", "egress" and "stowed" via simple colar and pin arrangment, with the pin found on the Frame Clamp Outer Piece. The colar (Index Colar or IC1) also sets the vertical tube height. This mount is not recommended for tilting seat systems with tilt more than 15 degrees or for installations angled beyond 15 degrees from vertical.

    Learn More
  3. DAESSY Unicorn Standard for iPad 7 (2019) - Unicorn Supcase Beetle Pro case shown here, the case case for the DAESSY Holder

    DAESSY Unicorn Standard Case for iPad 7, iPad 8 and iPad 9 (10.2")

    Out of Stock, ships in 2 to 3 weeks after ordering

    $298.00

    DAESSY Unicorn Standard Case for iPad 7, iPad 8 and iPad 9 (10.2"), based on a Supcase Unicorn Beetle Pro protective case. This Case will fit your 10.2" screen iPad and attach to your DAESSY Mount Kit in either landscape or portrait orientation.

    Learn More
  4. DAESSY Unicorn Standard Case for iPad Pro 12.9 2020 (Pencil and iPad Pro 12.9 not included)

    DAESSY Unicorn Standard Case for iPad Pro 12.9 2020 (Fourth Gen)

    1 in stock

    $298.00

    DAESSY Unicorn Standard Case for iPad Pro 12.9 (fourth generation, release in 2020), based on a Unicorn protective case. This Case will fit and protect the iPad and connect it to your DAESSY Mount Kit, allowing portrait or landscape orientation. (Pencil and iPad Pro 12.9 not included) Learn More
  5. DAESSY Unicorn Twist for iPad Air 2

    DAESSY Unicorn Twist Case for iPad Air 2

    $335.00

    Backorder

    DAESSY Unicorn Twist Case for iPad Air 2, based on a Supcase Unicorn Beetle Pro protective case. This Case will fit your 9.7" screen iPad and connect it to your DAESSY Mount Kit, whilst allowing "on-mount" rotation from portrait to landscape.

    Learn More
  6. DAESSY Quick Release Base - Mini Series

    DAESSY Quick Release Base - Mini Series

    In Stock, we'll ship it out as soon as we can

    $220.00

    The DAESSY Quick Release Base - Mini Series provides device attachment to technologies equipped with a DAESSY compatible mount plate. Installs to 3/4" or 19m tubing Learn More
  7. Fluid Camera Head for DAESSY M-Series Mounts (Mini Mounts)

    Fluid Camera Head for DAESSY M-Series Mounts (Mini Mounts)

    Out of Stock, ships in 4 weeks after ordering

    $475.00

    The Fluid Camera Head for DAESSY M-Series Mounts allows precise framing for seamless transition between photo and video for your compatible camera, all the while using your DAESSY Mini wheelchair mount as the base. Learn More
  8. Narrow Frame Clamp Side Mount Inner Piece for 1" Round Tube

    DAESSY Frame Clamp Inner Piece for 1" Round Tube - Narrow Side Mount

    Out of Stock, ships in 2 to 3 weeks after ordering

    $265.00

    A DAESSY Clamp for attachment to wheelchairs with 1" round frame tube and sits to the underneath of the tube. The narrow nature of the clamp allowd for attachment in places where the regualr width clamps may not.

    Learn More
  9. DAESSY Locking Swing Away

    DAESSY Locking Swing Away Mount

    Special Orders. We'll call you to discuss. Usually ships in 3 weeks

    The Locking Swing Away Mount can be swung away by pulling a cable underneath the horizontal tube. It has three stop positions. If you're using wheelchair with tilting seat, consider DAESSY Swing Aside Mount instead as the Locking Swing Away requires vertical installation and is not tilting seat ready.

    Learn More
  10. DAESSY Unicorn Standard for iPad 10 showing the static plate on the back connected to a DAESSY Lite Mount

    DAESSY Unicorn Standard Case for iPad 10 (10.9")

    Out of Stock, ships in 2 to 3 weeks after ordering

    $298.00

    DAESSY Unicorn Standard Case for iPad 10 (10.9"), based on a Supcase Unicorn Beetle Pro protective case. This Case will fit your 10.9" screen iPad 10 and attach to your DAESSY Mount Kit in either landscape or portrait orientation.

    Learn More

Items 21 to 30 of 95 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

List  Grid 

Set Ascending Direction