Free Shipping on orders over 50$

Got a questions about Assistive Technology?
Call 02 9971 0409

Search results for 'suction mount'

Items 21 to 30 of 86 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

List  Grid 

Set Ascending Direction
  1. Mount'n Mover - Solid Wheelchair Bracket and Adjustable Angle Plate

    Mount'n Mover Wheelchair Bracket - Solid Wheelchair Bracket and Angle Adjust Plate

    Out of Stock, ships in 2 to 3 weeks

    $230.00

    Rigid bracket for attaching Mount'n Mover Posts to Mount'n Mover wheelchair adapter components with the ability to adjust to any angled mounting - in 7.5° increments. Learn More
  2. Mount'n Mover Tray with the Quick Release Plate (additional cost for the Quick Release Plate)

    Mount'n Mover Tray - 12 x 12

    Out of Stock, ships in 2 to 3 weeks

    $180.00

    The Mount'n Mover Tray 12 x 12 is a quarter inch thick, transparent, impact resistant Polycarbonate tray Learn More
  3. Dynavox Adapter

    Mount'n Mover Adapter Plate - DV1

    Out of Stock, ships in 2 to 3 weeks

    $120.00

    Compatible with Dynavox Maestro, Tobii Dynavox T10, T15, Dynavox Vmax, M3, DV4, MT4 along with RAM EZ Roll'R cradles and RAM Tab-tite holders. For attaching to your Mount'n Mover Arm Quick Release Plate (sold separately) Learn More
  4. Mount'n Mover Extender Post

    Mount'n Mover Post Extension Kit

    Ordered as required, allow 4 weeks for delivery

    $255.00

    Extend the reach of your Mount'n Mover attachment Learn More
  5. DAESSY Mount Plate for iAdapter or Smart Series, includes mounting hardware (screws and posts)

    iAdapter Mount Plate - DAESSY Connection (no stand)

    Out of Stock, ships in 2 to 3 weeks

    $245.00

    A Mounting Plate to attach your iAdapter or Smart/Series device to DAESSY Quick Release Bases.

    Learn More
  6. DAESSY Rigid Mount

    DAESSY Rigid Mount - standard

    Special Orders. We'll call you to discuss. Usually ships in 3 weeks

    The most basic of the DAESSY Wheelchair Mounting Assemblies is the DAESSY Rigid Mount. This mount consists of two lengths of stainless steel connected together by a 90 degree Tube Connector.  This joins the Horizontal and Vertical Tubes of the DAESSY Rigid Mount at a fixed 90º angle and allows for independent angles with respect the offset of the vertical tube. A DAESSY Quick Release Base connects your technology to the kit. The poles can be held securely in three positions - "in use", "egress" and "stowed" via simple colar and pin arrangment, wiht the pin found on the Universal Frame Clamp Outer Piece, thus this mount's name.  The colar (Index Colar or IC1) also sets the vertical tube height.

    Learn More
  7. DAESSY Rigid Mount with Bent-Tube - locking. Locked in place.

    DAESSY Rigid Mount with Bent-Tube - locking

    Special Orders. We'll call you to discuss. Usually ships in 3 weeks

    The simplest of the DAESSY Wheelchair Mounting Assemblies is the DAESSY Rigid Mount with Bent-Tube - Locking. This mount consists of one length of stainless steel tube bent at 90 degrees.  The Horizontal and Vertical sections of the DAESSY Rigid Mount with Bent-Tube Mount are of the same single run of stainless steel tubing, which makes it simple to fit and adjust. A Locking Frame Clamp Assemlby connects the Bent-tube to the wheelchair and a DAESSY Quick Release Base connects your technology to the kit. Also include is a simple and easy locking mechanism, the Removable Outer Piece, which allows secure locking of the poles to the wheelchair when "in use" and easy removal from the wheelchair when not required. This version is best used on Tilting Seat wheelchairs. The DAESSY Rigid Mount with Bent-Tube Mount requires straight lines from the Frame Clamp Assembly to the back of the supported technology so if trays, armrests or other aspects of the wheelchair get in the way, consider a DAESSY Rigid Mount as an option for fitting purposes.

    Learn More
  8. DAESSY Rigid Mount with Bent-tube - the "in-use" position

    DAESSY Rigid Mount with Bent-tube - standard

    Special Orders. We'll call you to discuss. Usually ships in 3 weeks

    The most basic of the DAESSY Wheelchair Mounting Assemblies is the DAESSY Rigid Mount with Bent-tube. This mount consists of one run of stainless steel tube bent at ninety degrees connected to the wheelchair by a Frame Clamp Assembly. A DAESSY Quick Release Base connects your technology to the bent-tube. The pole can be held securely in three positions - "in use", "egress" and "stowed" via simple colar and pin arrangment, with the pin found on the Frame Clamp Outer Piece. The colar (Index Colar or IC1) also sets the vertical tube height. This mount is not recommended for tilting seat systems with tilt more than 15 degrees or for installations angled beyond 15 degrees from vertical.

    Learn More
  9. Quick Connect Plate

    Quick Connect Plate (Mount'n Mover and Easy Mover)

    Out of Stock, ships in 2 to 3 weeks

    $110.00

    The Quick Connect Plate can be added to a Mount'n Mover Tray to make it compatible with the Quick Connect Receiver and other standard quick release connectors Learn More
  10. Large Lip Supports (set of six)

    Mount'n Mover Tray Large Lip Supports (set of six)

    Out of Stock, ships in 2 to 3 weeks

    $55.00

    Lip supports create a lip or a channel to support or secure devices on acryclic trays. Learn More

Items 21 to 30 of 86 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

List  Grid 

Set Ascending Direction