Free Shipping on orders over 50$

Our Easter break:
Closed midday March 28th
Re-open 10am April 2nd
All the best!

Search results for 'iAdapter Mini with Blueto'

Items 31 to 37 of 37 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4

List  Grid 

Set Ascending Direction
  1. The RAM Table Top Triple suction cup base mount

    RAM Table Top Suction Mount with Triple Suction Base - for iPads with 9.7" to 10.5" screens

    Out of Stock, ships in 2 to 3 weeks after ordering

    $295.00

    The RAM Suction Cup Table Mount with Triple Base for iPads with 9.7" to 10.5" screens offers a simple attachment of iPads to clean, non-porous flat surfaces like acrylic trays, laminated desks or tables. The triple base adds more attachment security and stability however requires more table/surface space. Choose EZ Roll'R Tray for iPads not used in a case or Tab-Tite Cradle when your iPad is used in a protective case.

    Learn More
  2. Mount'n Mover Tray with the Quick Release Plate (additional cost for the Quick Release Plate)

    Mount'n Mover Tray - 12 x 16 with Lip

    Out of Stock, ships in 2 to 3 weeks after ordering

    $250.00

    The Mount'n Mover Tray 12 x 16 with Lip is a quarter inch thick, transparent, impact resistant Polycarbonate tray (size is 12" x 16", with a 2" lip). Learn More
  3. DAESSY Lite Mount, iPad holder is not included and are purchased separately

    DAESSY Lite Mount with Articulating Joints, two tubes

    Special Orders. We'll call you to discuss. Usually ships in 3 weeks

    Designed for mounting lightweight devices, tablets and iPads to lighter or smaller wheelchairs, the DAESSY Lite Mount with Articulating Joints has numerous possibilities. Learn More
  4. Duo - Switch Adapted Mouse

    Duo - Switch Adapted Mouse

    $0.00

    Backorder

    Discontinued.

    Duo is a wireless mouse for everyone. With Duo, you can easily control the mouse cursor with fine motor or gross motor movements. Left- and right-clicks are controlled with accessibility switches or the standard left- and right-click buttons on Duo. Duo can also be used as a stand-alone switch interface and works with switch scanning software that utilizes left- or right-clicks.

    Learn More
  5. DAESSY Rigid Mount with Bent-Tube - locking. Locked in place.

    DAESSY Rigid Mount with Bent-Tube - locking

    Special Orders. We'll call you to discuss. Usually ships in 3 weeks

    The simplest of the DAESSY Wheelchair Mounting Assemblies is the DAESSY Rigid Mount with Bent-Tube - Locking. This mount consists of one length of stainless steel tube bent at 90 degrees.  The Horizontal and Vertical sections of the DAESSY Rigid Mount with Bent-Tube Mount are of the same single run of stainless steel tubing, which makes it simple to fit and adjust. A Locking Frame Clamp Assemlby connects the Bent-tube to the wheelchair and a DAESSY Quick Release Base connects your technology to the kit. Also include is a simple and easy locking mechanism, the Removable Outer Piece, which allows secure locking of the poles to the wheelchair when "in use" and easy removal from the wheelchair when not required. This version is best used on Tilting Seat wheelchairs. The DAESSY Rigid Mount with Bent-Tube Mount requires straight lines from the Frame Clamp Assembly to the back of the supported technology so if trays, armrests or other aspects of the wheelchair get in the way, consider a DAESSY Rigid Mount as an option for fitting purposes.

    Learn More
  6. DAESSY Rigid Mount with Bent-tube - the "in-use" position

    DAESSY Rigid Mount with Bent-tube - standard

    Special Orders. We'll call you to discuss. Usually ships in 3 weeks

    The most basic of the DAESSY Wheelchair Mounting Assemblies is the DAESSY Rigid Mount with Bent-tube. This mount consists of one run of stainless steel tube bent at ninety degrees connected to the wheelchair by a Frame Clamp Assembly. A DAESSY Quick Release Base connects your technology to the bent-tube. The pole can be held securely in three positions - "in use", "egress" and "stowed" via simple colar and pin arrangment, with the pin found on the Frame Clamp Outer Piece. The colar (Index Colar or IC1) also sets the vertical tube height. This mount is not recommended for tilting seat systems with tilt more than 15 degrees or for installations angled beyond 15 degrees from vertical.

    Learn More
  7. DAESSY Rigid Mount with Adjustable Connector - locking

    DAESSY Rigid Mount with Adjustable Connector - locking

    Special Orders. We'll call you to discuss. Usually ships in 3 weeks

    $1,250.00

    This new version of the Rigid Mount, the Rigid Mount with Adjustable Connector, uses the Daessy Adjustable Tube Connectors (D-ATC87/87), an updated version of Daessy’s original adjustable connector) instead of a simply 90 degree tube joint, allowing for multiple and varied angles of the included horizontal tube. An adjustable Rigid Mount! Learn More

Items 31 to 37 of 37 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4

List  Grid 

Set Ascending Direction