DAESSY Mini Folding Mount

Be the first to review this product

Availability: Special Orders. We'll call you to discuss. Usually ships in 3 weeks


Click here for our Order Terms and Conditions
$1,465.00

Quick Overview

The Mini Folding Mount folds the horizontal tube down to the outside - a great iPad Mounting solution. The folding joint between the two mount tubes performs a 2-step folding sequence to bring the tubes parallel. When folded and removed from the chair the Mini Folding Mount is a more compact unit for storage. The mount is non-directional and may be installed on either side of the wheelchair.

* Required Fields

$1,465.00
Mini Folding Mount

More Views

  • Mini Folding Mount
  • Mini Folding Mount - parts
  • Mini Folding Mount - in the folded position
  • Mini Folding Mount - with a custom vertical tube
  • Optional Articulating Quick Release Bases (additional costs)
  • Optional Articulating Quick Release Base, small face, one handle (additional costs)

Details

The Mini Folding Mount, as the name suggests, folds the horizontal tube down to the outside. The folding joint between the two mount tubes performs a 2-step folding sequence to bring the tubes parallel. When folded and removed from the chair the Mini Folding Mount is a more compact unit for storage.

The mount is non-directional and may be installed on either side of the wheelchair.

The Frame Clamp Assembly is composed of a Frame Clamp Inner Piece and a Removable Frame Clamp Receiver. The Frame Clamp Inner Piece is clamped or bolted to the wheelchair frame while the Receiver holds the Vertical Tube.

An AAC device or iPad can be attached to the mount using an adapter plate, tray or a case specific to that device (not included with the kit, ordered separately). This adapter is attached to the Horizontal Tube of the mount assembly by means of the Quick Release Base (mini) that comes with your Mini Mount.  It is then secures the device and allows for quick detaching of the device from the mount when needed.

The complete mount can be lifted out of the Frame Clamp Receiver and removed from the wheelchair leaving only the Frame Clamp Assembly attached to the wheelchair frame. Additionally, the mount can be folded at the tube connector so that the tubes become side by side, allowing for quick chair transfers or for a more compact mouint when no attached.


Caution

The M-Series by DAESSY is a smaller, lightweight mount solution which may not be suitable for larger devices exceeding 10lbs or eye camera systems that require very tall setups.

When needing to support larger devices or requiring a taller setup refer to the DAESSY Folding Mount ROP (DFM2ROP).

The size and shape of the required Frame Clamp Inner Piece must be specified with the order of a standard mount. The Frame Clamps section provides comprehensive information on DAESSY Frame Clamp options. When no specification is made for a particular Frame Clamp Inner Piece the UFC1000IP 1" standard is provided.

In addition to the standard and variation parts an adapter plate or device holder is necessary to complete the mount. The section Device Adapters and Holders provides comprehensive information.

 

Option - Quick Release Base Upgrade

  • Upgrade the included standard Quick Release Base to an Articulating Quick Release Base - highly recommended for Eye-Gaze systems
  • Articulating Quick Release Bases allow device positioning independently of the mount kit's poles, fine tuning at the attachment point.
  • Choose from Large or Small face
  • Choose from no handles (allen key adjustemnt only), one quick handle or two quick handles

 

Tubes - Contact Communicate AT directly if interested

Standard configuration dimensions: 14" Horizontal Tube (35cm) and 24" x 6" offset S-curve Side Tube (61cm x 15cm offset)

Optional tube lengths are available on request. Substitution may be made on the initial mount order at no additional charge.

DAESSY Mini Folding Mount Tube are also available for purchase separately. 

Optional tubes:

  • Horizontal straight tube
    • 16" (41cm)
    • 18" (46cm)
  • Side S-curve tube - available with 3" offset (8cm) or 6" offset (15cm) in 4 inch increments to a maximum of 32" (81cm) length
    • 20" length, 3" offset (51cm x 8cm)
    • 24" length, 3" offset (61cm x 8cm)
    • 28" length, 3" offset (71cm x 8cm)
    • 32" length, 3" offset (81cm x 8cm)
    • 20" length, 6" offset (51cm x 15cm)
    • 28" length, 6" offset (71cm x 15cm)
    • 32" length, 6" offset (81cm x 15cm)

 

See For Yourself 

Here's a video taken by Indata at ATIA Chicago in 2010. Adam from Daedalus Technologies gives us a short run through some of the mount kits available.

 

You may also be interested in the following product(s)

DAESSY Mini Adjustable Mount

DAESSY Mini Adjustable Mount

DAESSY Folding Mount

DAESSY Folding Mount

$1,545.00
     

Additional Information

SKU D-M75FM
Included Accessories 2x Allen Keys, Instructions
Additional Features Can be used on the left or right side
GST Classification GST Free
Manual or Instructions (PDF) No
Video

See For Yourself 

Here's a video taken by Indata at ATIA Chicago in 2010. Adam from Daedalus Technologies gives us a short run through some of the mount kits available.

 

Materials Used Aluminium components, Stainless Steel tubing
Tube Size Used 3/4" or 19 mm
Weight Capacity max 4.5 kg
Vertical Height from Frame Clamp 61 cm
Horizontal Tube Width 35 cm

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.