Easy Mover Single Arm with Quick Connect

Be the first to review this product

Availability: Ordered as required, allow 4 weeks for delivery


Click here for our Order Terms and Conditions
$850.00

Quick Overview

The Easy Mover is EASY - easy to set up and use … just move it! Designed for speech devices, trays, cameras, and more - 2 movable joints (at the shoulder and the wrist). Attached to your wheelchair using the Mount'n Mover ecosystem of clamps.

* Required Fields

$850.00
Easy Mover Single Arm

Details

Easy to set up and use: just move it!

  • Movable mount for speech devices, trays, cameras, and more!
  • Easy and intuitive to use--just move it!
  • 2 movable joints (shoulder and wrist) ​Adjustable joint resistance
  • Joints can be adjusted from low to high resistance, making it easier or harder to move

New Quick Connect Receiver is compatible with:

  • Built-in features and plates on many speech devices and other mounts
  • Mount'n Mover trays and device plates using Quick Connect Plate Tilt functions/features
  • Adjust tilt from 0-180 degrees
  • Tilt hinge on Quick Connect Receiver is available with either low or high resistance 

 

Compare to Single Arm Mount'n Mover - (Single Arm Mount'n Mover)

  • Same reach
  • Lower price
  • Easier to use out of the box
  • Sleek design, without hoop and paddle
  • Tilt and arm joints do not lock
  • Same load capacity: 6.8 kg

 

Recommendation considerations:

  • Keep in mind that the arm joints and tilt angle do not lock
  • You may not want to use the Easy Mover for a heavy device if:
    • the person has a heavy device and uses their device with their wheelchair tilted; or
    • the person uses an eye gaze device; or
    • the device tilts downward, and they drive in this position

 To use:

  1. Attach the wheelchair hardware
  2. Insert the post
  3. Attach the Easy Mover's Link cube to the post
  4. Move the Easy Mover

 

If you want to change the resistance to moving it

  • Use the 3/16" hex key with the ball joint
  • Experiment with tightening or loosening the joints
  • Have the person try it out--can they move it? do you want them to move it?
  • Adjust it so it works for the person

Considerations:

  • Choose a High or Low resistance hinge at the time of order
  • The Tilt can be adjusted, but cannot be locked in place
  • If the person is going to tilt in their wheelchair while using the device, you may need to increase the joint resistance

 

Technical Specifications Dimensions

  • Height: 125 mm
  • Width: 76 mm
  • Length: 339 mm
  • Weight: 1 kg.
  • Material(s): Engineering Plastics (same as Gen 2 Mount'n Mover), Aircraft Aluminum, Steel

 

What's in the box?

  • Single Arm Easy Mover
    • Quick Connect Receiver (attached)
  • Tools:
    • 3/16" T-handle Hex Key with ball end
  • Materials
    • Easy Mover Instructions
    • Mount'n Mover Quick Guide (for wheelchair attachment reference)
    • Warranty registration card

You may also be interested in the following product(s)

Mount'n Mover Arm - Single

Mount'n Mover Arm - Single

$1,425.00
Mount'n Mover Arm - Tilt'n Turner

Mount'n Mover Arm - Tilt'n Turner

$998.00
Mount'n Mover Floor Stand

Mount'n Mover Floor Stand

$1,495.00
   

Additional Information

SKU BSD-EM1-QC
Included Accessories No
Additional Features No
GST Classification GST Free
Manual or Instructions (PDF)

Technical Specifications

Dimensions

  • Height: 4.9 inches (125.3 mm)
  • Width: 3 inches (76.2 mm)
  • Length: 13.4 inches (339.3 mm)
  • Weight: 2 pounds 5 oz.

Material(s)

  • Engineering Plastics (same as Gen 2 Mount'n Mover)
  • Aircraft Aluminum
  • Steel

What's in the box?

  • Single Arm Easy Mover 
    • Quick Connect Receiver (attached)
  • Tools:
    • 3/16" T-handle Hex Key with ball end
  • Materials
    • Easy Mover Instructions
    • Mount'n Mover Quick Guide (for wheelchair attachment reference)
    • Warranty registration card
Video No
Materials Used Engineering Plastics (same as Gen 2 Mount'n Mover), Aluminium, Steel
Tube Size Used variable - depends on need
Weight Capacity 6.5 kg
Vertical Height from Frame Clamp dependent upon what's required - from 12" to 24"
Horizontal Tube Width 340mm

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.