Mount'n Mover Adapter Plate - Camera Adapter

Be the first to review this product

Availability: 1 in stock


Click here for our Order Terms and Conditions

Only 1 left

$120.00

Quick Overview

Compatible with camera threaded attachments -for attaching to your Mount'n Mover Arm Quick Release Plate (sold separately or use the one that comes with your Mount'n Mover)

* Required Fields

$120.00

More Views

Details

For any "point-and-shoot" cameras, the CAM3 Adapter is the tool to use for positioning and accessing for your cameras on your Mount'n Mover Arm! Works for any camera with ¼" mounting, please contact us for mounting heavier cameras.

 

Attachment requires:

Included with your DP-CAM3 pack is:

  • Camera Plate
  • Hardware packet (included with DP-CAM3 plate)
  • Metal washer ⅝" plastic spacers
  • One 1/4-20 flat head phillips screw
  • One 3/8-16 flat head phillips screw
  • Four #8-32 x ¼" flat head screws

You'll also need the following:

  • Quick Release Plate (QRP) - this is not included int he DP-CAM3 pack and is purchased separately or use the one that comes with your Mount'n Mover Arm

 

How it Works

Most cameras will have a threaded hole on the underside for mounting. These holes will be utilized for mounting, either directly to the Camera Plate or a tripod head quick release.

There are several options to implement the Camera Plate (DP-CAM3). You can attach a camera directly to the DP-CAM3, or utilize a commercial Tripod/Monopod head.

 

Dimensions

  • Height: 3 inches (76.2mm)
  • Width: 3 inches (76.2mm)
  • Length: .25 inches (6.4mm)
  • Weight: 2.2 oz. (0.06kg)

Material(s)

  • Aluminum
  • Steel thread hardware
  • Rubber foam adhesive pad

What's in the box?

  • Camera Plate (DP-CAM3)
  • Attachment Screws
  • Adhesive Grip Material

 Attach Camera Plate to camera

Attachment Options

 
Attach the DP-CAM3 camera plate to your camera.
 
 
The DP-CAM3 comes with two screws and a washer. Use the smaller screw (1/4-20) and the washer to attach the camera.
Thread the screw and washer into the countersunk side of the Camera Plate. Tighten down to torque. Be careful not to over-torque the screw, as it may damage the camera.
 
 
Attach the QRP
 
 
Attach the QRPAlign the camera plate so that the four threaded steel inserts are in line with the lowest four countersunk holes in the QRP AND ensure the camera attachment screw (from Step 1) lines up with the 1/4 hole in the QRP. Attach the Quick Release Plate using four #8-32 x ¼" flat head screws.
 
 
Removing your camera
 
 
To remove the camera, you should be able to access the attachment screw (from Step 1) with a screwdriver.

 

 

Remove the cameraTripod head attachment

 

These instructions will deal specifically with:

 

 

General instructions for comparable tripod heads will be similar.

In this case, the cameras actually will attach to the Heads using a camera quick release plate.

 
Attach the Camera Plate
 
Attach Camera Plate to tripod
 
 
Using the larger screw (3/8"-16) screw the tripod head down, and torque it down so it is secure.
 
 
Attach the QRP
 
 
Attach QRP to tripod
 
 
Using the larger screw (3/8"-16) screw the tripod head down, and torque it down so it is secure. Attach the Quick Release Plate using four #8-32 x ¼" flat head screws

Additional Information

SKU BSD-DP-CAM3
Included Accessories attachment screws
Additional Features No
GST Classification GST Free
Manual or Instructions (PDF)

Device Plate - Camera 3 (DP-CAM3) Technical Drawing

Video No
Materials Used Aluminum and Stainless Steel
Tube Size Used n/a
Weight Capacity n/a
Vertical Height from Frame Clamp n/a
Horizontal Tube Width n/a

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.