Free Shipping on orders over 50$

Our Easter break:
Closed midday March 28th
Re-open 10am April 2nd
All the best!

DAESSY

DAESSY

Daedalus Technologies have made purpose built, wheelchair attached mounts for over 30 years. Their DAESSY system is designed to support technologies in the right place, each and every time it's needed.

Items 31 to 40 of 90 total

per page
Page:
  1. 2
  2. 3
  3. 4
  4. 5
  5. 6

List  Grid 

Set Ascending Direction
  1. The parts of the DAESSY Stem FlexiArm Switch Mount

    DAESSY Stem Flexiarm Switch Mount

    Out of Stock, ships in 2 to 3 weeks after ordering

    $446.00

    This FlexiArm Mount Kit is designed for switches and for solid attachment to round tube. Learn More
  2. The parts of the DAESSY Stem FlexiArm Releaseable Switch Mount

    DAESSY Stem Flexiarm Releaseable Switch Mount

    Out of Stock, ships in 2 to 3 weeks after ordering

    $472.50

    This FlexiArm Mount Kit is designed for switches and for solid attachment to round tube. The Releasable clamp allows removal of the FlexiArm whilst the Accessory Mount Clamp stays attached to the round tube. Learn More
  3. DAESSY Rolling Mount 36 Offset - tall

    DAESSY Rolling Mount 36 Offset

    Out of Stock, ships in 4 weeks after ordering

    $1,695.00

    The DAESSY Rolling Mount is an independent floor stand for any AAC device or laptop. It comes in a variety of versions, the base is 36" wide. Learn More
  4. DAESSY Rolling Mount 32 - Offset

    DAESSY Rolling Mount 32

    Out of Stock, ships in 4 weeks after ordering

    $1,595.00

    The DAESSY Rolling Mount is an independent floor stand for any AAC device or laptop. It comes in a variety of versions, the base is 32" wide. Learn More
  5. DAESSY Rolling Mount - Standard

    DAESSY Rolling Mount 24

    Out of Stock, ships in 4 weeks after ordering

    $1,495.00

    The DAESSY Rolling Mount is an independent floor stand for any AAC device or laptop. It comes is a choice of two base type versions - Standard and Offset and two height versions - Short and Medium. Learn More
  6. DAESSY Rigid Mount with Bent-tube - the "in-use" position

    DAESSY Rigid Mount with Bent-tube - standard

    Special Orders. We'll call you to discuss. Usually ships in 3 weeks

    The most basic of the DAESSY Wheelchair Mounting Assemblies is the DAESSY Rigid Mount with Bent-tube. This mount consists of one run of stainless steel tube bent at ninety degrees connected to the wheelchair by a Frame Clamp Assembly. A DAESSY Quick Release Base connects your technology to the bent-tube. The pole can be held securely in three positions - "in use", "egress" and "stowed" via simple colar and pin arrangment, with the pin found on the Frame Clamp Outer Piece. The colar (Index Colar or IC1) also sets the vertical tube height. This mount is not recommended for tilting seat systems with tilt more than 15 degrees or for installations angled beyond 15 degrees from vertical.

    Learn More
  7. DAESSY Rigid Mount with Bent-Tube - locking. Locked in place.

    DAESSY Rigid Mount with Bent-Tube - locking

    Special Orders. We'll call you to discuss. Usually ships in 3 weeks

    The simplest of the DAESSY Wheelchair Mounting Assemblies is the DAESSY Rigid Mount with Bent-Tube - Locking. This mount consists of one length of stainless steel tube bent at 90 degrees.  The Horizontal and Vertical sections of the DAESSY Rigid Mount with Bent-Tube Mount are of the same single run of stainless steel tubing, which makes it simple to fit and adjust. A Locking Frame Clamp Assemlby connects the Bent-tube to the wheelchair and a DAESSY Quick Release Base connects your technology to the kit. Also include is a simple and easy locking mechanism, the Removable Outer Piece, which allows secure locking of the poles to the wheelchair when "in use" and easy removal from the wheelchair when not required. This version is best used on Tilting Seat wheelchairs. The DAESSY Rigid Mount with Bent-Tube Mount requires straight lines from the Frame Clamp Assembly to the back of the supported technology so if trays, armrests or other aspects of the wheelchair get in the way, consider a DAESSY Rigid Mount as an option for fitting purposes.

    Learn More
  8. DAESSY Rigid Mount with Adjustable Connector - locking

    DAESSY Rigid Mount with Adjustable Connector - locking

    Special Orders. We'll call you to discuss. Usually ships in 3 weeks

    $1,250.00

    This new version of the Rigid Mount, the Rigid Mount with Adjustable Connector, uses the Daessy Adjustable Tube Connectors (D-ATC87/87), an updated version of Daessy’s original adjustable connector) instead of a simply 90 degree tube joint, allowing for multiple and varied angles of the included horizontal tube. An adjustable Rigid Mount! Learn More
  9. DAESSY Rigid Mount

    DAESSY Rigid Mount - standard

    Special Orders. We'll call you to discuss. Usually ships in 3 weeks

    The most basic of the DAESSY Wheelchair Mounting Assemblies is the DAESSY Rigid Mount. This mount consists of two lengths of stainless steel connected together by a 90 degree Tube Connector.  This joins the Horizontal and Vertical Tubes of the DAESSY Rigid Mount at a fixed 90º angle and allows for independent angles with respect the offset of the vertical tube. A DAESSY Quick Release Base connects your technology to the kit. The poles can be held securely in three positions - "in use", "egress" and "stowed" via simple colar and pin arrangment, wiht the pin found on the Universal Frame Clamp Outer Piece, thus this mount's name.  The colar (Index Colar or IC1) also sets the vertical tube height.

    Learn More
  10. DAESSY Rigid Mount

    DAESSY Rigid Mount - locking

    Special Orders. We'll call you to discuss. Usually ships in 3 weeks

    The most basic of the DAESSY Wheelchair Mounting Assemblies is the DAESSY Rigid Mount. This mount consists of two lengths of stainless steel connected together by a 90 degree Tube Connector.  This joins the Horizontal and Vertical Tubes of the DAESSY Rigid Mount at a fixed 90º angle and allows for independent angles with respect the offset of the vertical tube. A DAESSY Quick Release Base connects your technology to the kit. Also include is a simple and easy locking mechanism, the Removable Outer Piece, which allows secure locking of the poles to the wheelchair when "in use" and easy removal from the wheelchair when not required. This version is best used on Tilting Seat wheelchairs. Learn More

Items 31 to 40 of 90 total

per page
Page:
  1. 2
  2. 3
  3. 4
  4. 5
  5. 6

List  Grid 

Set Ascending Direction