Details
The Mini Rigid Mount is very simple mounting solution with a horizontal pole connected to a vertical pole by a Mini Tube joint - a great iPad Mounting solution. It is easily "upgradeable" to a Mini Folding Mount if needs change or is easy to attach, detach and performs well as is. The mount is non-directional and may be installed on either side of the wheelchair.
This Mount consists of a Frame Clamp Assembly, a Vertical Tube, a 90 Degree Tube Connector, a Horizontal Tube and a Mini Quick Release Base.
The Frame Clamp Assembly is composed of a Frame Clamp Inner Piece and a Removable Frame Clamp Receiver. The Frame Clamp Inner Piece is clamped or bolted to the wheelchair frame while the Receiver holds the Vertical Tube.
An AAC device or iPad can be attached to the mount using an adapter plate, tray or a case specific to that device (not included with the kit, ordered separately). This adapter is attached to the Horizontal Tube of the mount assembly by means of the Quick Release Base (mini) that comes with your Mini Mount. It is then secures the device and allows for quick detaching of the device from the mount when needed.
The complete mount can be lifted out of the Frame Clamp Receiver and removed from the wheelchair leaving only the Frame Clamp Assembly attached to the wheelchair frame.
Standard configuration dimensions: 14" Horizontal Tube (35cm) and 24" x 6" offset S-curve Side Tube (61cm x 15cm offset)
Option - Quick Release Base Upgrade
- Upgrade the included standard Quick Release Base to an Articulating Quick Release Base - highly recommended for Eye-Gaze systems
- Articulating Quick Release Bases allow device positioning independently of the mount kit's poles, fine tuning at the attachment point.
- Choose from Large or Small face
- Choose from no handles (allen key adjustemnt only), one quick handle or two quick handles
Tubes - Contact Communicate AT directly if interested
Standard configuration dimensions: 14" Horizontal Tube (35cm) and 24" x 6" offset S-curve Side Tube (61cm x 15cm offset)
DAESSY Mini Folding Mount Tube are also available for purchase separately.
Optional tubes:
- Horizontal straight tube
- 16" (41cm)
- 18" (46cm)
- Side S-curve tube - available with 3" offset (8cm) or 6" offset (15cm) in 4 inch increments to a maximum of 32" (81cm) length
- 20" length, 3" offset (51cm x 8cm)
- 24" length, 3" offset (61cm x 8cm)
- 28" length, 3" offset (71cm x 8cm)
- 32" length, 3" offset (81cm x 8cm)
- 20" length, 6" offset (51cm x 15cm)
- 28" length, 6" offset (71cm x 15cm)
- 32" length, 6" offset (81cm x 15cm)
Caution
The M-Series by DAESSY is a smaller, lightweight mount solution which may not be suitable for larger devices exceeding 4.5 kg or eye camera systems that require very tall setups.
When needing to support larger devices or requiring a taller setup refer to the DAESSY Rigid Mount ROP (DRM1ROP).
See For Yourself
Here's a video taken by Indata at ATIA Chicago in 2010. Adam from Daedalus Technologies gives us a short run through of some of the mount kits available.
You may also be interested in the following product(s)
DAESSY Mini Folding Mount
$1,605.00
As low as:
$1,405.00
|
DAESSY Mini Adjustable Mount
$1,695.00
As low as:
$1,495.00
|
DAESSY Rigid Mount - locking
$1,150.00
As low as:
$950.00
|
Additional Information
| SKU | D-M75-RM |
|---|---|
| Included Accessories | 2x Allen Keys, Instructions |
| Additional Features | Can be used on the left or right side |
| GST Classification | GST Free |
| Manual or Instructions (PDF) | No |
| Video | See For Yourself Here's a video taken by Indata at ATIA Chicago in 2010. Adam from Daedalus Technologies gives us a short run through of some of the mount kits available.
|
| Materials Used | Aluminium components, Stainless Steel tubing |
| Tube Size Used | 3/4" or 19 mm |
| Weight Capacity | max 4.5 kg |
| Vertical Height from Frame Clamp | 61 cm |
| Horizontal Tube Width | 35 cm |
| warranty | N/A |
Check items to add to the cart or select all
You have no items in your shopping cart.
