DAESSY Original Mounts

The DAESSY Folding Mount is a sturdy device support system for attachment to the side of wheelchairs.  It's unique feature is that the mounted device can be folded to the side of the wheelchair.  The mount is suitable for light weight through to heavier devices and is designed to last.

Learn More

The DAESSY Inner Piece Adapter is used to bolt onto various other clamps to provide the interface for connecting other mount components or as a frame clamp on its own when bolted directly onto a suitable frame. Learn More

The Locking Swing Away Mount can be swung away by pulling a cable underneath the horizontal tube. It has three stop positions. If you're using wheelchair with tilting seat, consider DAESSY Swing Aside Mount instead as the Locking Swing Away requires vertical installation and is not tilting seat ready.

Learn More

The DAESSY Positioner Mount is a very versatile mounting system for when accurate device positioning is a priority, like for eye-gaze access technologies. Up to 40cm of height adjustability. Learn More

The most basic of the DAESSY Wheelchair Mounting Assemblies is the DAESSY Rigid Mount. This mount consists of two lengths of stainless steel connected together by a 90 degree Tube Connector.  This joins the Horizontal and Vertical Tubes of the DAESSY Rigid Mount at a fixed 90º angle and allows for independent angles with respect the offset of the vertical tube. A DAESSY Quick Release Base connects your technology to the kit. Also include is a simple and easy locking mechanism, the Removable Outer Piece, which allows secure locking of the poles to the wheelchair when "in use" and easy removal from the wheelchair when not required. This version is best used on Tilting Seat wheelchairs. Learn More

The most basic of the DAESSY Wheelchair Mounting Assemblies is the DAESSY Rigid Mount. This mount consists of two lengths of stainless steel connected together by a 90 degree Tube Connector.  This joins the Horizontal and Vertical Tubes of the DAESSY Rigid Mount at a fixed 90º angle and allows for independent angles with respect the offset of the vertical tube. A DAESSY Quick Release Base connects your technology to the kit. The poles can be held securely in three positions - "in use", "egress" and "stowed" via simple colar and pin arrangment, wiht the pin found on the Universal Frame Clamp Outer Piece, thus this mount's name.  The colar (Index Colar or IC1) also sets the vertical tube height.

Learn More

This new version of the Rigid Mount, the Rigid Mount with Adjustable Connector, uses the Daessy Adjustable Tube Connectors (D-ATC87/87), an updated version of Daessy’s original adjustable connector) instead of a simply 90 degree tube joint, allowing for multiple and varied angles of the included horizontal tube. An adjustable Rigid Mount! Learn More

The simplest of the DAESSY Wheelchair Mounting Assemblies is the DAESSY Rigid Mount with Bent-Tube - Locking. This mount consists of one length of stainless steel tube bent at 90 degrees.  The Horizontal and Vertical sections of the DAESSY Rigid Mount with Bent-Tube Mount are of the same single run of stainless steel tubing, which makes it simple to fit and adjust. A Locking Frame Clamp Assemlby connects the Bent-tube to the wheelchair and a DAESSY Quick Release Base connects your technology to the kit. Also include is a simple and easy locking mechanism, the Removable Outer Piece, which allows secure locking of the poles to the wheelchair when "in use" and easy removal from the wheelchair when not required. This version is best used on Tilting Seat wheelchairs. The DAESSY Rigid Mount with Bent-Tube Mount requires straight lines from the Frame Clamp Assembly to the back of the supported technology so if trays, armrests or other aspects of the wheelchair get in the way, consider a DAESSY Rigid Mount as an option for fitting purposes.

Learn More

The most basic of the DAESSY Wheelchair Mounting Assemblies is the DAESSY Rigid Mount with Bent-tube. This mount consists of one run of stainless steel tube bent at ninety degrees connected to the wheelchair by a Frame Clamp Assembly. A DAESSY Quick Release Base connects your technology to the bent-tube. The pole can be held securely in three positions - "in use", "egress" and "stowed" via simple colar and pin arrangment, with the pin found on the Frame Clamp Outer Piece. The colar (Index Colar or IC1) also sets the vertical tube height. This mount is not recommended for tilting seat systems with tilt more than 15 degrees or for installations angled beyond 15 degrees from vertical.

Learn More