Details
Easy to set up and use: just move it!
- Movable mount for speech devices, trays, cameras, and more!
- Easy and intuitive to use--just move it!
- 2 movable joints (shoulder and wrist) Adjustable joint resistance
- Joints can be adjusted from low to high resistance, making it easier or harder to move
New Quick Connect Receiver is compatible with:
- Built-in features and plates on many speech devices and other mounts
- Mount'n Mover trays and device plates using Quick Connect Plate Tilt functions/features
- Adjust tilt from 0-180 degrees
- Tilt hinge on Quick Connect Receiver is available with either low or high resistance
Compare to Single Arm Mount'n Mover - (Single Arm Mount'n Mover)
- Same reach
- Lower price
- Easier to use out of the box
- Sleek design, without hoop and paddle
- Tilt and arm joints do not lock
- Same load capacity: 6.8 kg
Recommendation considerations:
- Keep in mind that the arm joints and tilt angle do not lock
- You may not want to use the Easy Mover for a heavy device if:
- the person has a heavy device and uses their device with their wheelchair tilted; or
- the person uses an eye gaze device; or
- the device tilts downward, and they drive in this position
To use:
- Attach the wheelchair hardware
- Insert the post
- Attach the Easy Mover's Link cube to the post
- Move the Easy Mover
If you want to change the resistance to moving it
- Use the 3/16" hex key with the ball joint
- Experiment with tightening or loosening the joints
- Have the person try it out--can they move it? do you want them to move it?
- Adjust it so it works for the person
Considerations:
- Choose a High or Low resistance hinge at the time of order
- The Tilt can be adjusted, but cannot be locked in place
- If the person is going to tilt in their wheelchair while using the device, you may need to increase the joint resistance
Technical Specifications Dimensions
- Height: 125 mm
- Width: 76 mm
- Length: 339 mm
- Weight: 1 kg.
- Material(s): Engineering Plastics (same as Gen 2 Mount'n Mover), Aircraft Aluminum, Steel
What's in the box?
- Single Arm Easy Mover
- Quick Connect Receiver (attached)
- Tools:
- 3/16" T-handle Hex Key with ball end
- Materials
- Easy Mover Instructions
- Mount'n Mover Quick Guide (for wheelchair attachment reference)
- Warranty registration card
You may also be interested in the following product(s)
Mount'n Mover Arm - Single
$1,895.00
|
Mount'n Mover Arm - Tilt'n Turner
$1,440.00
|
Mount'n Mover Floor Stand
$1,995.00
|
Additional Information
SKU | BSD-EM1-QC |
---|---|
Included Accessories | No |
Additional Features | No |
GST Classification | GST Free |
Manual or Instructions (PDF) | Technical Specifications Dimensions
Material(s)
What's in the box?
|
Video | No |
Materials Used | Engineering Plastics (same as Gen 2 Mount'n Mover), Aluminium, Steel |
Tube Size Used | variable - depends on need |
Weight Capacity | 6.5 kg |
Vertical Height from Frame Clamp | dependent upon what's required - from 12" to 24" |
Horizontal Tube Width | 340mm |
warranty | N/A |