Details
Updated Version - now shipping
The Tilt’n Turner can be rotated, the angle adjusted, and any device equipped with a Quick Release Plate can attach to it. It does not really have an “arm”.
It has a small footprint and is useful for positioning devices at a specific angle and height.
It can be used in conjunction with another Mount'n Mover Arm, whether that be a Dual Arm or a Single Arm, by attaching Tilt'n Turner to the top of the post if the post extends up above the Arm.
Tilt'n Turner Features
- 1 joint with 24 potential lock positions
- The single Lever unlocks the Device/Wrist
- The Lever takes slightly greater force, but could be extended for better leverage
- The Tilt adjusts from flat to vertical and can be locked at any position in-between
- Most compact, does not swingaway
Extension
- 0 cm from shoulder to wrist joint as there is no "Arm"
- Tilt from 0° to 110°
User Controls
- Easy-access, one-handed operation
- The Lever unlocks wrist only
- Includced Tilt lock lever
Effort to unlock and move
- Less than 1kg of force to unlock
- The force to move Tilt'n Tuner varies with device weight
- An Adjustable friction screw changes force required to move it
- Less than 0.5 kg of forice to unlock the tilt
- The force to adjust the tilt depends on torque hinge selected (high force or low force options)
Reach required to reposition
- Allows a person to rotate their device or tray 360 degrees
- Only accessible on the side of the wheelchair to which it is mounted.
The Tilt’n Turner is recommended for:
- Smaller devices that are to be positioned on a post, just in front of the armrest
- To create a “double decker”, placing a second device atop the post of a Dual or Single Arm Mount'n Mover (additional parts will be required)
- For "double decker" operation which enables someone to do two things concurrently (ie, read and use a laptop), the post must extend above the other arm (additional parts will be required)
- Attachment to a table to position a tray or other device at a good operating height (additional parts be required)
- For a person with a visual impairment
- A workstation where you need something off the table surface, positioned at a particular height, angle and orientation (additional parts will be required)
- A workstation where you’d like to attach one or more trays or devices to create a turntable effect; and have it lock in particular positions (additional parts will be required)
The 2016 Improvements and Updates (Dual Arm shown below)
You may also be interested in the following product(s)
Mount'n Mover Arm - Dual
$2,395.00
|
Mount'n Mover Arm - Single
$1,895.00
|
Additional Information
| SKU | BSD-M0-TQ |
|---|---|
| Included Accessories | No |
| Additional Features | No |
| GST Classification | GST Free |
| Manual or Instructions (PDF) | Dimensions
Material(s)
What's in the box?
|
| Video | Overview Video |
| Materials Used | Die-Cast Magnesium Alloy, Electroless Nickel and Stainless Steels, Anodized aircraft-grade Aluminum, Engineering Plastics |
| Tube Size Used | No |
| Weight Capacity | No |
| Vertical Height from Frame Clamp | dependent upon what's required - from 12" to 24" |
| Horizontal Tube Width | n/a |
| warranty | N/A |
Check items to add to the cart or select all
You have no items in your shopping cart.
