Free Shipping on orders over 50$

Current Opening Hours:
10:00am to 3:30pm Mon - Wed, Fri
Thursdays are shipping days, no phones answered.
Apologies in advance.

Search results for 'DAESSY'

Items 1 to 10 of 90 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

List  Grid 

Set Ascending Direction
  1. /

    DAESSY Device Adapter - Tobii Dynavox T10/T15

    2 in stock

    $250.00

    This DAESSY Adapter Plate is used with the Tobii-Dynavox T10 or T15. Compatible with any DAESSY Quick Release Base. Learn More
  2. DAESSY Rigid Mount

    DAESSY Rigid Mount - standard

    Special Orders. We'll call you to discuss. Usually ships in 3 weeks

    The most basic of the DAESSY Wheelchair Mounting Assemblies is the DAESSY Rigid Mount. This mount consists of two lengths of stainless steel connected together by a 90 degree Tube Connector.  This joins the Horizontal and Vertical Tubes of the DAESSY Rigid Mount at a fixed 90º angle and allows for independent angles with respect the offset of the vertical tube. A DAESSY Quick Release Base connects your technology to the kit. The poles can be held securely in three positions - "in use", "egress" and "stowed" via simple colar and pin arrangment, wiht the pin found on the Universal Frame Clamp Outer Piece, thus this mount's name.  The colar (Index Colar or IC1) also sets the vertical tube height.

    Learn More
  3. DAESSY Rigid Mount with Bent-Tube - locking. Locked in place.

    DAESSY Rigid Mount with Bent-Tube - locking

    Special Orders. We'll call you to discuss. Usually ships in 3 weeks

    The simplest of the DAESSY Wheelchair Mounting Assemblies is the DAESSY Rigid Mount with Bent-Tube - Locking. This mount consists of one length of stainless steel tube bent at 90 degrees.  The Horizontal and Vertical sections of the DAESSY Rigid Mount with Bent-Tube Mount are of the same single run of stainless steel tubing, which makes it simple to fit and adjust. A Locking Frame Clamp Assemlby connects the Bent-tube to the wheelchair and a DAESSY Quick Release Base connects your technology to the kit. Also include is a simple and easy locking mechanism, the Removable Outer Piece, which allows secure locking of the poles to the wheelchair when "in use" and easy removal from the wheelchair when not required. This version is best used on Tilting Seat wheelchairs. The DAESSY Rigid Mount with Bent-Tube Mount requires straight lines from the Frame Clamp Assembly to the back of the supported technology so if trays, armrests or other aspects of the wheelchair get in the way, consider a DAESSY Rigid Mount as an option for fitting purposes.

    Learn More
  4. DAESSY Rigid Mount with Bent-tube - the "in-use" position

    DAESSY Rigid Mount with Bent-tube - standard

    Special Orders. We'll call you to discuss. Usually ships in 3 weeks

    The most basic of the DAESSY Wheelchair Mounting Assemblies is the DAESSY Rigid Mount with Bent-tube. This mount consists of one run of stainless steel tube bent at ninety degrees connected to the wheelchair by a Frame Clamp Assembly. A DAESSY Quick Release Base connects your technology to the bent-tube. The pole can be held securely in three positions - "in use", "egress" and "stowed" via simple colar and pin arrangment, with the pin found on the Frame Clamp Outer Piece. The colar (Index Colar or IC1) also sets the vertical tube height. This mount is not recommended for tilting seat systems with tilt more than 15 degrees or for installations angled beyond 15 degrees from vertical.

    Learn More
  5. DAESSY Unicorn Twist for iPad Pro 12.9 (2017)

    DAESSY Unicorn Twist Case for iPad Pro 12.9 2017 (Second gen)

    $335.00

    Backorder

    DISCONTINUED

    DAESSY Unicorn Twist Case for iPad Pro 12.9 second generation (2017), based on a Unicorn protective case. This Case will fit the new iPad Pro 12.9 released in 2017 and connect it to your DAESSY Mount Kit, whilst allowing "on-mount" rotation from portrait to landscape.

    Learn More
  6. DAESSY Unicorn Standard Case for iPad Pro 12.9 (2017)

    DAESSY Unicorn Standard Case for iPad Pro 12.9 2017 (Second Gen)

    $288.00

    Backorder

    DISCONTINUED

    DAESSY Unicorn Standard Case for iPad Pro 12.9 Second generation (2017), based on a Unicorn protective case. This Case will fit the new iPad Pro 12.9 released in 2017 and connect it to your DAESSY Mount Kit, allowing portrait or landscape orientation.

    Learn More
  7. DAESSY Unicorn Twist for iPad Pro 10.5 (2017)

    DAESSY Unicorn Twist Case for iPad Pro 10.5 (2017) and iPad Air 3 (2019)

    1 in stock

    $335.00

    DAESSY Unicorn Twist Case for iPad Pro 10.5 (2017) and iPad Air 3 (2019 model), based on a Unicorn protective case. This Case will fit the iPad Pro 10.5 released in 2017 and the iPad Air 3 released in 2019 and connect it to your DAESSY Mount Kit, whilst allowing "on-mount" rotation from portrait to landscape. Learn More
  8. DAESSY Unicorn Standard Case for iPad Pro 10.5 (2017)

    DAESSY Unicorn Standard Case for iPad Pro 10.5 (2017) and iPad Air 3

    Out of Stock, ships in 2 to 3 weeks after ordering

    $288.00

    DAESSY Unicorn Standard Case for iPad Pro 10.5 (2017) and iPad Air 3, based on a Unicorn protective case. This Case will fit the iPad Pro 10.5 released in 2017 or the iPad Air 3 release in 2019 and connect it to your DAESSY Mount Kit, allowing portrait or landscape orientation. Learn More
  9. DAESSY VESA Quick Release Base

    DAESSY VESA Quick Release Base

    In Stock, we'll ship it out as soon as we can

    $280.00

    The VESA Quick Release Base attaches to a VESA mounting support instead of onto a tube. Any device with a DAESSy Mounting Plate can then be attached to this Quick Release Base. Learn More
  10. DAESSY Surface Pro Holder Twist

    DAESSY Surface Pro Holder Twist - for Surface Pro 4, 5 and 6

    Out of Stock, ships in 2 to 3 weeks after ordering

    $355.00

    DAESSY Surface Pro Holder Twist, based on a UAG case. This Case will fit the Surface Pro 2017 and Surface Pro 4 only and has "on-mount" rotation from portrait to landscape built in. The kick-stand and carry strap can still be used as well as the Microsoft Surface Pro Type Cover (if you have one). Learn More

Items 1 to 10 of 90 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

List  Grid 

Set Ascending Direction