Mount'n Mover Floor Stand

Great for evaluations and access from a bed or the floor!

The Mount'n Mover Floor Stand positions devices anywhere from six inches to six feet off the floor. Simply remove your Mount'n Mover from your wheelchair or table mount and insert it into the Floor Stand.

Once the Floor Stand is set, it takes seconds to attach your Mount'n Mover. No tools required

The Mount'n Mover Floor Stand is designed to compliment an existing Mount'n Mover wheelchair or Desk Clamp system.

It is compatible with any Mount'n Mover Arm with an attached Mount'n Mover Post or can be used as the primary mounting system for over be use or with recliner chairs etc. In that case, a Mount'n Mover Arm and Mount'n Mover Post will be required as well.

Features

Two rear "Total-Lock" casters Locks the caster swivel and wheel rotation.

Vertical Telescoping Post Height adjustment of up to 50 cm (plus the length of your Mount'n Mover Post - not included and purchased separately or already owned).

Angle adjustment of up to ± 10°

Purchase Options:

Standard Kit

Two rear "Total-Lock" Casters only, no extension Pole - a Mount'n Mover Arm and Pole is required.

Features include :

• Compatible with any Mount'n Mover with post
• Two rear "Total-Lock" casters
  Locks the caster swivel and wheel rotation
• Vertical Telescoping Post
  - Height adjustment of up to 20" (plus the length of your Mount'n Mover Post)
• Angle adjustment
  - Up to ± 10 degrees

Castors Kit

All four corners of the Stand include the "Total-Lock" Casters for easy roll across smooth surfaces - Mount'n Mover Arm and Pole required.

Four "Total-Lock" casters allow you to maneuver the Floor Stand more easily!  "Total-Lock" casters brake the wheel and lock the swivel with one action.

The four-caster Floor Stand is perfect for folks who use eye gaze devices, or for those who frequently reposition their Floor Stand. For direct-select devices, we recommend locking all four casters for best stability.

Features include :

• Compatible with any Mount'n Mover with post
• Four "Total-Lock" casters - Easy to maneuver in any direction
• Vertical Telescoping Post - Height adjustment of up to 20" (plus the length of the Mount'n Mover Post)
• Angle adjustment - Up to ± 10°

Standard Kit with Extender

The Standard Kit above with an extension Pole, for greater reach over beds. The Extender adds 16" or 40 cm of reach from your Floor Stand's upright rail - a Mount'n Mover Arm and Pole required. This works well for people who need that extra distance for bed access.

Features include :

• Compatible with any Mount'n Mover with post
• Two rear "Total-Lock" casters
  - Locks the caster swivel and wheel rotation
• Vertical Telescoping Post
  - Height adjustment of up to 20" (plus the length of the Mount'n Mover Post)
• Angle adjustment
  - Up to ± 10°
• Adjustable offset extension
  -Extends your mount bracket up to 16"

Casters Kit with Extender

The Caster Kit above with an extension Pole, for greater reach - Mount'n Mover Arm and Pole required.

Ease of maneuverability with extended reach! For people who need access to their devices past the reach of their Mount'n Mover, and prefer the enhanced maneuverability of four swivel casters.

Features include :

• Compatible with any Mount'n Mover with post
• Four "Total-Lock" casters - Easy to maneuver in any direction
• Vertical Telescoping Post - Height adjustment of up to 20" (plus the length of the Mount'n Mover Post)
• Angle adjustment - Up to ± 10°
• Adjustable offset extension -Extends your mount bracket horizontally up to 16"

Height Adjustability and Range

There are two telescoping post elements in the Floor Stand:

• Floor Stand Post
  (telescopes within the Upright Rail)
• Mount'n Mover post
  (telescopes from the Floor Stand Post)

The Floor Stand post clamp allows you to insert the post attached to your Mount' Mover (the same one used for a wheelchair mount). This makes it easy to move your Mount'n Mover from the wheelchair or table clamp to the Floor Stand without any additional adjustments. The additional height adjustment makes it easy to accommodate a variety of needs, from access in a bed, recliner, wheelchair, the floor, or a standing position.

High Positions (60 cm  - 180 cm)

The Mount' Mover is generally attached to the top of the post for higher positioning. For use in higher positions, the post is inserted into the Floor Stand clamp from above. Height adjustments are made at either the Upright Rail or the Floor Stand clamps.

Low Positions (15 cm  - 60 cm)

To set the Floor Stand for lower positions, the post is set so it comes above the Mount'n Mover arms, up through the Link (see photo). In this case, the post is inserted into the Floor Stand clamp from below, enabling positioning of the Mount'n Mover from the floor level to the Floor Stand clamp.

Cautions

Because the Mount'n Mover is so flexible, there are areas it can reach that may make the Floor Stand systems unstable, particularly when a heavy device set at a very high position and extended outside the wheel and caster base.

Stay within the wheel and caster "footprint".

You should be safe if you avoid using the device in the area in red. In this area, there is an increased risk for tipping.

Maximum Height - Please also keep in mind that there is a "height limit" built into the floor stand post.  If it does not extend any further, it has likely reached its maximum height.

Additions and Packages

Add a Tilt'n Tuner - receive a FREE Mount'n Mover Pole, your choice of length

Add a Single Arm Mount'n Mover - receive a FREE Mount'n Mover Pole, your choice of length

Add a Dual Arm Mount'n Mover - receive a FREE Mount'n Mover Pole, your choice of length, AND a FREE Mount'n Mover Quick Release Plate as well. One comes with your Mount'n Mover Arm, so this additional Plate can be used to attach additional equipment, trays or technologies.