Free Shipping on orders over 50$

October is AAC Awareness Month!

Search results for 'Daessy swing away'

Items 1 to 10 of 82 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

List  Grid 

Set Ascending Direction
  1. DAESSY Swing Aside Mount on powered mobility

    DAESSY Swing Aside Mount

    Special Orders. We'll call you to discuss. Usually ships in 3 weeks

    The Swing Aside Mount can be swung away by pulling a cable underneath the horizontal tube. It has three stop positions and is secure on tilting seat wheelchairs. Learn More
  2. DAESSY MinI Swing Aside Mount Kit

    DAESSY Mini Swing Aside Mount

    Special Orders. We'll call you to discuss. Usually ships in 3 weeks

    The Mini Swing Aside Mount allow the horizontal tube to swing on an arc away from the wheelchair occupant - a great iPad Mounting solution. The Swing Aside tube joint performs three functions - tension on each of the 6 stop points so free rotation is avoided, a locking function at any of the six stop points by winding the lock-collar and full free roation if required by pulling down on the lock-collar. The mount is non-directional and may be installed on either side of the wheelchair.

    Learn More
  3. DAESSY Lite Mount Inner Piece Adapter

    DAESSY Lite Mount Inner Piece Adapter

    Out of Stock, ships in 2 to 3 weeks after ordering

    $99.00

    The DAESSY Lite Mount Offset Link is for use with DAESSY Frame Clamp Inner Pieces that do not use a DAESSY Inner Piece Adapter (IPA). Learn More
  4. DAESSY Lite Desk Mount, DAESSY iPad Twist Adapter case (not included, sold separately)

    DAESSY Lite Desk Mount

    Out of Stock, ships in 2 to 3 weeks after ordering

    $520.00

    Designed for mounting lightweight devices, tablets and iPads to lighter or smaller wheelchairs, the DAESSY Lite Mount with Articulating Joints has numerous possibilities. Learn More
  5. DAESSY Mount Plate for iAdapter or Smart Series, includes mounting hardware (screws and posts)

    iAdapter Mount Plate - DAESSY Connection (no stand)

    Out of Stock, ships in 2 to 3 weeks after ordering

    $245.00

    A Mounting Plate to attach your iAdapter or Smart/Series device to DAESSY Quick Release Bases.

    Learn More
  6. Articulated Horizontal Joint Tube Version just like our rental demo showing the optional Articulating Quick Release Base (both additional cost)

    DAESSY Rolling Mount 32, Offset Base - RENTAL

    AVAILABLE FOR HIRE

    $155.00

    RENT our demo unit of the DAESSY Rolling Mount. It is an independent floor stand for any AAC device or tablet (device adapter dependent). We have one rental unit and it is the 32" Offset Base version with the Articulated Joint Tube and an Articulating Quick Release Base.

    A quantity of 1 (one) in your cart represents a RENTAL PERIOD of 2 weeks. A quantity of 2 (two) represents a RENTAL PERIOD of 4 weeks, which is the maximum allowed.

    The Price is calculated per 2 week RENTAL PERIOD.

    Learn More
  7. DAESSY Rigid Mount

    DAESSY Rigid Mount - standard

    Special Orders. We'll call you to discuss. Usually ships in 3 weeks

    The most basic of the DAESSY Wheelchair Mounting Assemblies is the DAESSY Rigid Mount. This mount consists of two lengths of stainless steel connected together by a 90 degree Tube Connector.  This joins the Horizontal and Vertical Tubes of the DAESSY Rigid Mount at a fixed 90º angle and allows for independent angles with respect the offset of the vertical tube. A DAESSY Quick Release Base connects your technology to the kit. The poles can be held securely in three positions - "in use", "egress" and "stowed" via simple colar and pin arrangment, wiht the pin found on the Universal Frame Clamp Outer Piece, thus this mount's name.  The colar (Index Colar or IC1) also sets the vertical tube height.

    Learn More
  8. DAESSY Rigid Mount with Bent-Tube - locking. Locked in place.

    DAESSY Rigid Mount with Bent-Tube - locking

    Special Orders. We'll call you to discuss. Usually ships in 3 weeks

    The simplest of the DAESSY Wheelchair Mounting Assemblies is the DAESSY Rigid Mount with Bent-Tube - Locking. This mount consists of one length of stainless steel tube bent at 90 degrees.  The Horizontal and Vertical sections of the DAESSY Rigid Mount with Bent-Tube Mount are of the same single run of stainless steel tubing, which makes it simple to fit and adjust. A Locking Frame Clamp Assemlby connects the Bent-tube to the wheelchair and a DAESSY Quick Release Base connects your technology to the kit. Also include is a simple and easy locking mechanism, the Removable Outer Piece, which allows secure locking of the poles to the wheelchair when "in use" and easy removal from the wheelchair when not required. This version is best used on Tilting Seat wheelchairs. The DAESSY Rigid Mount with Bent-Tube Mount requires straight lines from the Frame Clamp Assembly to the back of the supported technology so if trays, armrests or other aspects of the wheelchair get in the way, consider a DAESSY Rigid Mount as an option for fitting purposes.

    Learn More
  9. DAESSY Rigid Mount with Bent-tube - the "in-use" position

    DAESSY Rigid Mount with Bent-tube - standard

    Special Orders. We'll call you to discuss. Usually ships in 3 weeks

    The most basic of the DAESSY Wheelchair Mounting Assemblies is the DAESSY Rigid Mount with Bent-tube. This mount consists of one run of stainless steel tube bent at ninety degrees connected to the wheelchair by a Frame Clamp Assembly. A DAESSY Quick Release Base connects your technology to the bent-tube. The pole can be held securely in three positions - "in use", "egress" and "stowed" via simple colar and pin arrangment, with the pin found on the Frame Clamp Outer Piece. The colar (Index Colar or IC1) also sets the vertical tube height. This mount is not recommended for tilting seat systems with tilt more than 15 degrees or for installations angled beyond 15 degrees from vertical.

    Learn More
  10. DAESSY Lite Mount Offset Link

    DAESSY Lite Mount Offset Link

    Out of Stock, ships in 2 to 3 weeks after ordering

    $99.00

    The DAESSY Lite Mount Offset Link is for use with DAESSY Frame Clamp Inner Pieces that do not use a DAESSY Inner Piece Adapter (IPA). Learn More

Items 1 to 10 of 82 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

List  Grid 

Set Ascending Direction