Wheelchairs Mounts

This new version of the Rigid Mount, the Rigid Mount with Adjustable Connector, uses the Daessy Adjustable Tube Connectors (D-ATC87/87), an updated version of Daessy’s original adjustable connector) instead of a simply 90 degree tube joint, allowing for multiple and varied angles of the included horizontal tube. An adjustable Rigid Mount! Learn More

The most basic of the DAESSY Wheelchair Mounting Assemblies is the DAESSY Rigid Mount. This mount consists of two lengths of stainless steel connected together by a 90 degree Tube Connector.  This joins the Horizontal and Vertical Tubes of the DAESSY Rigid Mount at a fixed 90º angle and allows for independent angles with respect the offset of the vertical tube. A DAESSY Quick Release Base connects your technology to the kit. The poles can be held securely in three positions - "in use", "egress" and "stowed" via simple colar and pin arrangment, wiht the pin found on the Universal Frame Clamp Outer Piece, thus this mount's name.  The colar (Index Colar or IC1) also sets the vertical tube height.

Learn More

The most basic of the DAESSY Wheelchair Mounting Assemblies is the DAESSY Rigid Mount. This mount consists of two lengths of stainless steel connected together by a 90 degree Tube Connector.  This joins the Horizontal and Vertical Tubes of the DAESSY Rigid Mount at a fixed 90º angle and allows for independent angles with respect the offset of the vertical tube. A DAESSY Quick Release Base connects your technology to the kit. Also include is a simple and easy locking mechanism, the Removable Outer Piece, which allows secure locking of the poles to the wheelchair when "in use" and easy removal from the wheelchair when not required. This version is best used on Tilting Seat wheelchairs. Learn More

The DAESSY Quick Release Base - Standard Series provides device attachment to technologies equipped with a DAESSY compatible mount plate. Installs to 7/8" or 22m tubing Learn More

The DAESSY Quick Release Base - Mini Series provides device attachment to technologies equipped with a DAESSY compatible mount plate. Installs to 3/4" or 19m tubing Learn More

The DAESSY Positioner Mount is a very versatile mounting system for when accurate device positioning is a priority, like for eye-gaze access technologies. Up to 40cm of height adjustability. Learn More

The Mini Rigid Mount is very simple mounting solution with a horizontal pole connected to a vertical pole by a Mini Tube joint - a great iPad Mounting solution. It is easily "upgradeable" to a Mini Folding Mount if needs change or is easy to attach, detach and performs well as is. The mount is non-directional and may be installed on either side of the wheelchair. Learn More

The Mini Folding Mount folds the horizontal tube down to the outside - a great iPad Mounting solution. The folding joint between the two mount tubes performs a 2-step folding sequence to bring the tubes parallel. When folded and removed from the chair the Mini Folding Mount is a more compact unit for storage. The mount is non-directional and may be installed on either side of the wheelchair. Learn More

The Mini Bent-Tube Mount is a basic mount assembly. A single right-angle bent tube provides a simple support for a communication device, iPad or tablet. The Mini Bent-Tube Mount is easily removed from the chair and is non-directional so that it may be installed on either side of a wheelchair.

Learn More