Details
The Mini Adjustable Mount has several points of adjustment to setup and position the mount. Two rotating joints can be angled and twisted in numerous directions to adjust the 'horizontal' tube position.
This mount is supported on the wheelchair by a Frame Clamp Assembly permanently attached to either the left or right side of the wheelchair. The Frame Clamp Assembly is composed of a Frame Clamp Inner Piece and a Removable Frame Clamp Receiver (RFCR). The Inner Piece is clamped or bolted to the wheelchair frame while the Receiver holds the Vertical Tube.
An AAC device or iPad can be attached to the mount using an adapter plate, tray or a case specific to that device (not included with the kit, ordered separately). This adapter is attached to the Horizontal Tube of the mount assembly by means of the Quick Release Base (mini) that comes with your Mini Mount. It is then secures the device and allows for quick detaching of the device from the mount when needed.
The complete mount can be lifted out of the Frame Clamp Receiver and removed from the wheelchair leaving only the Frame Clamp Assembly attached to the wheelchair frame. Additionally, the mount can be swung away when the adjustable height clamp lock handle is loosened.
Height setup possible between 46cm - 79cm from the Frame Clamp to 'horizontal' tube position.
The M-Series by DAESSY is a smaller, lightweight mount solution which may not be suitable for larger devices exceeding 4.5 kg or eye camera systems that require very tall setups.
When needing to support larger devices or requiring a taller setup refer to the DAESSY Positioner Mount.
See For Yourself
Here's a video taken by Indata at ATIA Chicago in 2010. Adam from Daedalus Technologies gives us a short run through of some of the mount kits available.
You may also be interested in the following product(s)
DAESSY Positioner Mount
$1,745.00
|
Additional Information
| SKU | D-M75-AM |
|---|---|
| Included Accessories | 2x Allen Keys, Instructions |
| Additional Features | Can be used on the left or right side, height adjustable |
| GST Classification | GST Free |
| Manual or Instructions (PDF) | No |
| Video | See For Yourself Here's a video taken by Indata at ATIA Chicago in 2010. Adam from Daedalus Technologies gives us a short run through of some of the mount kits available.
|
| Materials Used | Aluminium components, Stainless Steel tubing |
| Tube Size Used | 3/4" or 19 mm |
| Weight Capacity | max 4.5 kg |
| Vertical Height from Frame Clamp | range: adjustable - min 46cm to max 79cm from the Frame Clamp to 'horizontal' tube position |
| Horizontal Tube Width | dependent upon setup |
| warranty | N/A |
Check items to add to the cart or select all
You have no items in your shopping cart.
