Free Shipping on orders over 50$

Got a questions about Assistive Technology?
Call 02 9971 0409

DAESSY Original Mounts

DAESSY Original Mounts

7 Item(s)

per page

List  Grid 

Set Ascending Direction
  1. DAESSY Swing Aside Mount on powered mobility

    DAESSY Swing Aside Mount

    Special Orders. We'll call you to discuss. Usually ships in 3 weeks

    The Swing Aside Mount can be swung away by pulling a cable underneath the horizontal tube. It has three stop positions and is secure on tilting seat wheelchairs. Learn More
  2. DAESSY Rigid Mount with Bent-tube - the "in-use" position

    DAESSY Rigid Mount with Bent-tube - standard

    Special Orders. We'll call you to discuss. Usually ships in 3 weeks

    The most basic of the DAESSY Wheelchair Mounting Assemblies is the DAESSY Rigid Mount with Bent-tube. This mount consists of one run of stainless steel tube bent at ninety degrees connected to the wheelchair by a Frame Clamp Assembly. A DAESSY Quick Release Base connects your technology to the bent-tube. The pole can be held securely in three positions - "in use", "egress" and "stowed" via simple colar and pin arrangment, with the pin found on the Frame Clamp Outer Piece. The colar (Index Colar or IC1) also sets the vertical tube height. This mount is not recommended for tilting seat systems with tilt more than 15 degrees or for installations angled beyond 15 degrees from vertical.

    Learn More
  3. DAESSY Rigid Mount with Bent-Tube - locking. Locked in place.

    DAESSY Rigid Mount with Bent-Tube - locking

    Special Orders. We'll call you to discuss. Usually ships in 3 weeks

    The simplest of the DAESSY Wheelchair Mounting Assemblies is the DAESSY Rigid Mount with Bent-Tube - Locking. This mount consists of one length of stainless steel tube bent at 90 degrees.  The Horizontal and Vertical sections of the DAESSY Rigid Mount with Bent-Tube Mount are of the same single run of stainless steel tubing, which makes it simple to fit and adjust. A Locking Frame Clamp Assemlby connects the Bent-tube to the wheelchair and a DAESSY Quick Release Base connects your technology to the kit. Also include is a simple and easy locking mechanism, the Removable Outer Piece, which allows secure locking of the poles to the wheelchair when "in use" and easy removal from the wheelchair when not required. This version is best used on Tilting Seat wheelchairs. The DAESSY Rigid Mount with Bent-Tube Mount requires straight lines from the Frame Clamp Assembly to the back of the supported technology so if trays, armrests or other aspects of the wheelchair get in the way, consider a DAESSY Rigid Mount as an option for fitting purposes.

    Learn More
  4. DAESSY Rigid Mount

    DAESSY Rigid Mount - standard

    Special Orders. We'll call you to discuss. Usually ships in 3 weeks

    The most basic of the DAESSY Wheelchair Mounting Assemblies is the DAESSY Rigid Mount. This mount consists of two lengths of stainless steel connected together by a 90 degree Tube Connector.  This joins the Horizontal and Vertical Tubes of the DAESSY Rigid Mount at a fixed 90º angle and allows for independent angles with respect the offset of the vertical tube. A DAESSY Quick Release Base connects your technology to the kit. The poles can be held securely in three positions - "in use", "egress" and "stowed" via simple colar and pin arrangment, wiht the pin found on the Universal Frame Clamp Outer Piece, thus this mount's name.  The colar (Index Colar or IC1) also sets the vertical tube height.

    Learn More
  5. DAESSY Rigid Mount

    DAESSY Rigid Mount - locking

    Special Orders. We'll call you to discuss. Usually ships in 3 weeks

    The most basic of the DAESSY Wheelchair Mounting Assemblies is the DAESSY Rigid Mount. This mount consists of two lengths of stainless steel connected together by a 90 degree Tube Connector.  This joins the Horizontal and Vertical Tubes of the DAESSY Rigid Mount at a fixed 90º angle and allows for independent angles with respect the offset of the vertical tube. A DAESSY Quick Release Base connects your technology to the kit. Also include is a simple and easy locking mechanism, the Removable Outer Piece, which allows secure locking of the poles to the wheelchair when "in use" and easy removal from the wheelchair when not required. This version is best used on Tilting Seat wheelchairs. Learn More
  6. DAESSY Positioner Mount

    DAESSY Positioner Mount

    Special Orders. We'll call you to discuss. Usually ships in 3 weeks

    The DAESSY Positioner Mount is a very versatile mounting system for when accurate device positioning is a priority, like for eye-gaze access technologies. Up to 40cm of height adjustability. Learn More
  7. DAESSY Folding Mount - UFCOP version, not tilting seat compliant

    DAESSY Folding Mount

    Special Orders. We'll call you to discuss. Usually ships in 3 weeks

    $1,545.00

    The DAESSY Folding Mount is a sturdy device support system for attachment to the side of wheelchairs.  It's unique feature is that the mounted device can be folded to the side of the wheelchair.  The mount is suitable for light weight through to heavier devices and is designed to last.

    Learn More

7 Item(s)

per page

List  Grid 

Set Ascending Direction