DAESSY
-
DAESSY Swing Aside Mount
Special Orders. We'll call you to discuss. Usually ships in 3 weeks$1,885.00 As low as: $1,685.00The Swing Aside Mount can be swung away by pulling a cable underneath the horizontal tube. It has three stop positions and is secure on tilting seat wheelchairs. Learn More -
DAESSY Surface Pro Holder with Eyegaze Bracket (for Surface Pro 4/5/67, Surface Pro 8 or Surface Pro 9/10)
Out of Stock, ships in 2 to 3 weeks after ordering$625.00The DAESSY Surface Pro Holder with Eyegaze, based on a UAG case is designed to fit your Surface Pro and allows for connection to any DAESSY Quick Release Base AND can hold your eye-tracker camera as well. Learn More -
DAESSY Surface Pro Holder
Out of Stock, ships in 2 to 3 weeks after ordering$495.00DAESSY Surface Pro Holder Twist, based on a UAG case. This Case will fit your Surface Pro and has "on-mount" rotation from portrait to landscape built in. The kick-stand and carry strap can still be used as well as the Microsoft Surface Pro Type Cover (if you have one). Choose between Surface Pro 4/5/6/7 models, Surface Pro 8 and Surface Pro 9/10 models (different size tablets)
Learn More -
DAESSY Stem Flexiarm Switch Mount
Out of Stock, ships in 2 to 3 weeks after ordering$675.00 As low as: $625.00This FlexiArm Mount Kit is designed for switches and for solid attachment to round tube. Learn More -
DAESSY Stem Flexiarm Releaseable Switch Mount
Out of Stock, ships in 2 to 3 weeks after ordering$700.00 As low as: $650.00This FlexiArm Mount Kit is designed for switches and for solid attachment to round tube. The Releasable clamp allows removal of the FlexiArm whilst the Accessory Mount Clamp stays attached to the round tube. Learn More -
DAESSY Rolling Mount 36 Offset
Out of Stock, ships in 4 weeks after ordering$1,695.00The DAESSY Rolling Mount is an independent floor stand for any AAC device or laptop. It comes in a variety of versions, the base is 36" wide. Learn More -
DAESSY Rolling Mount 32
Out of Stock, ships in 4 weeks after ordering$1,595.00The DAESSY Rolling Mount is an independent floor stand for any AAC device or laptop. It comes in a variety of versions, the base is 32" wide. Learn More -
DAESSY Rolling Mount 24
Out of Stock, ships in 4 weeks after ordering$1,495.00The DAESSY Rolling Mount is an independent floor stand for any AAC device or laptop. It comes is a choice of two base type versions - Standard and Offset and two height versions - Short and Medium. Learn More -
DAESSY Rigid Mount with Bent-tube - standard
Special Orders. We'll call you to discuss. Usually ships in 3 weeks$1,020.00 As low as: $820.00The most basic of the DAESSY Wheelchair Mounting Assemblies is the DAESSY Rigid Mount with Bent-tube. This mount consists of one run of stainless steel tube bent at ninety degrees connected to the wheelchair by a Frame Clamp Assembly. A DAESSY Quick Release Base connects your technology to the bent-tube. The pole can be held securely in three positions - "in use", "egress" and "stowed" via simple colar and pin arrangment, with the pin found on the Frame Clamp Outer Piece. The colar (Index Colar or IC1) also sets the vertical tube height. This mount is not recommended for tilting seat systems with tilt more than 15 degrees or for installations angled beyond 15 degrees from vertical.
Learn More -
DAESSY Rigid Mount with Bent-Tube - locking
Special Orders. We'll call you to discuss. Usually ships in 3 weeks$1,020.00 As low as: $820.00The simplest of the DAESSY Wheelchair Mounting Assemblies is the DAESSY Rigid Mount with Bent-Tube - Locking. This mount consists of one length of stainless steel tube bent at 90 degrees. The Horizontal and Vertical sections of the DAESSY Rigid Mount with Bent-Tube Mount are of the same single run of stainless steel tubing, which makes it simple to fit and adjust. A Locking Frame Clamp Assemlby connects the Bent-tube to the wheelchair and a DAESSY Quick Release Base connects your technology to the kit. Also include is a simple and easy locking mechanism, the Removable Outer Piece, which allows secure locking of the poles to the wheelchair when "in use" and easy removal from the wheelchair when not required. This version is best used on Tilting Seat wheelchairs. The DAESSY Rigid Mount with Bent-Tube Mount requires straight lines from the Frame Clamp Assembly to the back of the supported technology so if trays, armrests or other aspects of the wheelchair get in the way, consider a DAESSY Rigid Mount as an option for fitting purposes.
Learn More
