Details
The DAESSY Locking Swing Away Mount consists of ONE length of stainless-steel tube, bent at ninety degrees to form a right-angle structure that is supported on the wheelchair by a Frame Clamp Assembly permanently attached to either the left or right side of the wheelchair.
The tube of the Locking Swing Away Mount can be swung away independently and is well suited to people with the dexterity to reach the Release Cable that runs the length of the L-bend tube.
Swing Away
A pull down on this cable pulls up on a locking pin down at the frame clamp assembly and unlocks the tube to rotate, allowing the entire tube to swing away or swing back in place.
The Release Cable retracts a spring-loaded lock pin in the rotating joint. The Frame Clamp Assembly is composed of a Frame Clamp Inner Piece (Clamp) and a Locking Swing Away Outer Piece (LSAOP). The Inner Piece is attached to the wheelchair frame while the LSAOP holds the Vertical Tube.
On the vertical tube is the pull-pin collar, actuated by pulling down on the cable underneath the horizontal section of the L-bend tube. A Removable Outer Piece secured around the lower end of the Vertical Tube fits into the Receiver to position the tube and prevent rotation.
The lock pin holes allow the mount to be swung away and relocked at 90º or 270º away from the user.
The mounted device is attached to a quick release plate or a specific adapter (purchased separately), It is attached to the Horizontal Tube of the mount assembly by means of the DAESSY Quick Release Base system which provides security whilst mounted and for quick detachment via the locking pull-pin.
Tilting Seat Compatibility
The design of this mount DOES NOT allow for use on a tilt seat system as the pull-pin is vertical, meaning it is susceptible to gravity effects over time.
For tilting seat "Swinging Mount" option, see the DAESSY Swing Aside Mount
Notes
The DAESSY Locking Swing Away Mount can support equipment that is heavy enough to unbalance an unoccupied wheelchair, particularly when the mount is swung aside. It should be completely removed or the mounted device detached before the wheelchair is vacated.
When used on a manual wheelchair it is advisable to remove the device and mount when the wheelchair occupant is transferred to and from the wheelchair.
Option - Quick Release Base Upgrade
- Upgrade the included standard Quick Release Base to an Articulating Quick Release Base
- Articulating Quick Release Bases allow device positioning independently of the mount kit's poles, fine tuning at the attachment point.
- Choose from Large or Small face
- Choose from no handles (allen key adjustment only), one quick handle or two quick handles
You may also be interested in the following product(s)
DAESSY Swing Aside Mount
$1,730.00
As low as:
$1,530.00
|
DAESSY Positioner Mount
$1,745.00
|
Additional Information
| SKU | D-LSA7 |
|---|---|
| Included Accessories | Allen Key, Instructions |
| Additional Features | Can be used on the left or right side. Titling Seat Systems required the Removable Outer Piece (ROP) variant |
| GST Classification | GST Free |
| Manual or Instructions (PDF) | No |
| Video | See For Yourself Here's a video taken by Indata at ATIA Chicago in 2010. Adam from Daedalus Technologies gives us a short run through some of the mount kits available.
|
| Materials Used | Aluminium components, Stainless Steel tubing |
| Tube Size Used | 7/8" or 22mm |
| Weight Capacity | max 6.2 kg |
| Vertical Height from Frame Clamp | 55 cm (22") - std |
| Horizontal Tube Width | 40 cm (16") - std |
| warranty | N/A |
Check items to add to the cart or select all
You have no items in your shopping cart.
